基于nRF905的无线温度测量系统的研究与设计

发布时间 : 星期一 文章基于nRF905的无线温度测量系统的研究与设计更新完毕开始阅读

精品文档

致 谢

经过半年的忙碌和工作,本次毕业设计已经接近尾声,作为一个本科生的毕业设计,由于经验的匮乏,难免有许多考虑不周全的地方,如果没有导师的督促指导,以及一起工作的同学们的支持,想要完成这个设计是难以想象的。

在这里首先要感谢我的指导老师陈宜冬老师。陈老师平日里工作繁多,但在我做毕业设计的每个阶段,从查阅资料,设计草案的确定和修改,中期检查,到后期详细设计等整个过程中都给予了我悉心的指导。我的设计较为复杂,但是陈老师仍然细心地纠正我学习中的错误。在跟陈老师的学习过程中,除了敬陈老师的专业水平外,他的治学严谨和科学研究的精神也是我永远学习的榜样,并将积极影响我今后的学习和工作。

然后还要感谢大学四年来所有的老师,为我们打下计算机专业知识的基础。同时还要感谢所有的同学们,正是因为有了你们的支持和鼓励,此次毕业设计才会顺利完成。

最后感谢我的母校—哈尔滨理工大学四年来对我的大力栽培。

值得下载

精品文档

参考文献

1 何立民.单片机应用系统设计[M].北京航空航天大学出版社,2000年:

93~95

2 胡汉才.单片机原理及系统设计[M].清华大学出版社,1996年第一版:

32~34

3 张洪润等编著.单片机应用设计[M].北京航空航天大学出版社,2006年第

一版:8~9

4 郑长征,毛哲,谢兆鸿.多个DSl8B20在粮库测温系统中的应用[J].自动

化技术与应用,2006:36~38

5 潘勇,孟庆斌.基于DSl8820的多点温度测量系统设计[J].电子测量技术,

2008(9):91~93

6 谢维成,杨加国.单片机原理与应用及89C52程序设计[M].清华大学出版

社,2006:35~38

7 石东海.单片机数据通信技术从入门到精通[M].西安电子科技大学出版

社,2002:204~206

8 贾振国.DS1820及高精度温度测量的实现,电子技术应用.2000:9~14 9 周月霞,孙传友.DS18B20硬件连接及软件编程,传感器世界,2001:

13~21

10 冯国珍.基于数字温度传感器DS18B20的分布式测温系统的设计[J].吉林

化工学院学报.2003:46~49

11 潘勇,孟庆斌.基于DSl8820的多点温度测量系统设计[J].电子测量技术,

2008(9):91~93

12 李文忠,段朝玉.短距离无线数据通信[M].北京航空航天大学出版社,

2006:72~78

13 Simon Haykin,Machael Moher.现代无线通信[M].郑宝玉.电子工业出

版社,2006:131~134

14 Nordic VLSI ASA. Single chip 433/868/915 MHz Transceiver nRF905,Product

Datasheet,2004:135~142 15 Y.-H. You. Adaptive frequency hopping scheme for interference-limited WPAN

application.Electronical Letters.2001(15):976~978 16 Guiyun Tian.Foundation and Application of Microcontraller[M].高等教育出版

社,2004:105~112

值得下载

精品文档

附 录

附录A 英文原文

Structure and function of the MCS-51 series

MCS-51 is a name of a piece of one-chip computer series which Intel Company produces. This company introduced 8 top-grade one-chip computers of MCS-51 series in 1980 after introducing 8 one-chip computers of MCS-48 series in 1976. It belong to a lot of kinds this line of one-chip computer the chips have,such as 8051, 8031, 8751, 80C51BH, 80C31BH,etc., their basic composition, basic performance and instruction system are all the same. 8051 daily representatives- 51 serial one-chip computers.

An one-chip computer system is made up of several following parts: (1) One microprocessor of 8 (CPU). ( 2) At slice data memory RAM (128B/256B),it use not depositting not can reading /data that write, such as result not middle of operation, final result and data wanted to show, etc. ( 3) Procedure memory ROM/EPROM (4KB/8KB ), is used to preserve the procedure , some initial data and form in slice. But does not take ROM/EPROM within some one-chip computers, such as 8031 , 8032, 80C ,etc.. ( 4) Four 8 run side by side I/O interface P0 four P3, each mouth can use as introduction , may use as exporting too. ( 5) Two timer / counter, each timer / counter may set up and count in the way, used to count to the external incident, can set up into a timing way too,and can according to count or result of timing realize the control of the computer.(6) Five cut off cutting off the control system of the source . (7)One all duplexing serial I/O mouth of UART (universal asynchronous receiver/transmitter (UART) ), is it realize one-chip computer or one-chip computer and serial communication of computer to use for. (8) Stretch oscillator and clock produce circuit, quartz crystal finely tune electric capacity need outer. Allow oscillation frequency as 12 megahertas now at most. Every the above-mentioned part was joined through the inside data bus .Among them, CPU is a core of the one-chip computer, it is the control of the computer and command centre, made up of such parts as arithmetic unit and controller ,etc..The arithmetic unit can carry on 8 persons of arithmetic operation and unit ALU of logic operation while including one, the 1 storing device temporarilies of 8, storing device 2 temporarily, 8's accumulation device ACC, register B and procedure state register PSW, etc. Person who accumulate ACC count by 2 input ends entered of checking etc. temporarily as one operation often, come from person who store 1 operation is it is it make operation to go on to count temporarily , operation result and loopback ACC with another one. In addition, ACC is often regarded as the transfer station of data transmission on 8051 inside . The same as general microprocessor, it is the busiest register. Help remembering that agreeing with A expresses in the order. The controller includes the procedure counter , the order is depositted, the order decipher, the oscillator and timing circuit, etc. The procedure counter is made up of counter of 8 for two, amounts to 16. It is a byte

值得下载

精品文档

address counter of the procedure in fact, the content is the next IA that will carried out in PC. The content which changes it can change the direction that the procedure carries out . Shake the circuit in 8051 one-chip computers, only need outer quartz crystal and frequency to finely tune the electric capacity, its frequency range is its 12MHZ of 1.2MHZ. This pulse signal, as 8051 basic beats of working, namely the minimum unit of time. 8051 is the same as other computers, the work in harmony under the control of the basic beat, just like an orchestra according to the beat play that is commanded.

There are ROM (procedure memory , can only read ) and RAM in 8051 slices (data memory, can is it can write ) two to read, they have each independent memory address space, dispose way to be the same with general memory of computer. Procedure 8051 memory and 8751 slice procedure memory capacity 4KB, address begin from 0000H, used for preserving the procedure and form constant. Data 8051- 8751 8031 of memory data memory 128B, address false 00FH, use for middle result to deposit operation, the data are stored temporarily and the data are buffered etc.. In RAM of this 128B, there is unit of 32 byteses that can be appointed as the job register, this and general microprocessor is different, 8051 slice RAM and job register rank one formation the same to arrange the location. It is not very the same that the memory of MCS-51 series one-chip computer and general computer disposes the way in addition. General computer for first address space, ROM and RAM can arrange in different space within the range of this address at will, namely the addresses of ROM and RAM, with distributing different address space in a formation. While visiting the memory, corresponding and only an address Memory unit, can ROM, it can be RAM too, and by visiting the order similarly. This kind of memory structure is called the structure of Princeton. 8051 memories are divided into procedure memory space and data memory space on the physics structure, there are four memory spaces in all: The procedure stores in one and data memory space outside data memory and one in procedure memory space and one outside one, the structure forms of this kind of procedure device and data memory separated form data memory, called Harvard structure. But use the angle from users, 8051 memory address space is divided into three kinds: (1) In the slice, arrange blocks of FFFFH , 0000H of location , in unison outside the slice (use 16 addresses). (2) The data memory address space outside one of 64KB, the address is arranged from 0000H 64KB FFFFH (with 16 addresses ) too to the location. (3) Data memory address space of 256B (use 8 addresses). Three above-mentioned memory space addresses overlap, for distinguishing and designing the order symbol of different data transmission in the instruction system of 8051: CPU visit slice, ROM order spend MOVC , visit block RAM order uses MOVX outside the slice, RAM order uses MOV to visit in slice.

8051 one-chip computer have four 8 walk abreast I/O port, call P0, P1, P2 and P3. Each port is 8 accurate two-way mouths, accounts for 32 pins altogether. Every one I/O line can be used as introduction and exported independently. Each port includes a latch (namely special function register ), one exports the driver and a introduction buffer . Make data can latch when outputting, data can buffer when making

值得下载

联系合同范文客服:xxxxx#qq.com(#替换为@)