发布时间 : 星期四 文章VMware 2V0-620 Exam中英文对照更新完毕开始阅读
How is the network initially configured? 网络最初是如何配置的?
A. The network is configured by Automatic Private IP Addressing (APIPA). 网络通过APIPA配置
B. The network is configured based on the settings detected in DNS. 网络的配置基于在DNS检测到的设置
C. The network is configured with the address as specified in the installer. 网络配置基于安装程序详细说明的地址
D. The network is automatically configured by DHCP. 网络通过DHCP自动配置 Answer: D
Explanation:
QUESTION NO: 19
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured.
管理员已经完成一个交互式ESXi 6.x的安装，但是不知道配置了哪个地址
Where is the ESXi host IP address configured? ESXi IP地址配置在哪儿 A. RVC console RVC控制台
B. Direct Console User Interface 指向控制用户界面 C. vSphere Web Client vSphere网页客户端 D. vSphere Client vSphere客户端
Answer: B
Explanation:
QUESTION NO: 20
An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface.
管理员刚刚在ESXi主机直接控制台的用户界面配置IP地址。
How can the configuration be validated as correct without any additional tools? 在没任何额外的工具时如何验证这些配置是正确的
A. Add the host to vCenter Server and if it works, then all networking settings are ok. 将主机添加到vCenter服务器,如果成功的话,那么所有网络设置就可以了 B. Select the Test Management Network option from the DCUI. 从DCUI选择测试管理网络选项。
C. Connect to the host with the vSphere Client and click the Test Network option. 连接到主机与vSphere客户端并单击测试网络的选择
D. Use PowerCLI to connect to the host and initiate a network test. 使用PowerCLI连接到主机并启动一个网络测试 Answer: B
Explanation:
QUESTION NO: 21
An administrator has recently installed a new ESXi 6.x Host, and during the configuration noticessporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.
管理员最近安装了一个新的ESXi 6.x主机,在配置noticessporadic网络问题,检查是否这个问题发生在某个配置时候,管理员想重置系统。
How can this be accomplished in the shortest amount of time? 如何能在最短的时间内完成
A. Run the ESXi installer again and reinstall the host. 再次运行ESXi安装程序,重新安装主机
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
从vSphere客户端直接连接到主机时选择重置系统配置选项
C. From the Direct Console User Interface, select Reset System Configuration. 从直接控制台的用户界面,选择重置系统配置
D. Use a host profile to reset the configuration to a default state. 使用主机配置文件配置重置为默认状态 Answer: C
Explanation:
QUESTION NO: 22
Your manager has given you a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host.
你的管理者给你一个bash脚本,检索数据ESXi 6.x主机配置.主机安装后需要准确的收集这些数据,并直接运行在主机上。
Which two actions can be used to run this script on an ESXi host? (Choose two.) 以下哪两个可以用来运行此脚本在ESXi主机
A. Connect to the host with Ruby vSphere Console and run the script from there. 连接到主机使用Ruby vSphere控制台并运行脚本
B. Enable SSH access from the Direct Console User Interface. 从直接控制台支持SSH访问的用户界面
C. Enable the ESXi Shell from the Direct Console User Interface. 使ESXi壳从直接控制台的用户界面
D. Run the script directly from the vSphere Web Client. 从vSphere Web客户端直接运行脚本
Answer: B,C
Explanation:
QUESTION NO: 23
What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch?
什么是新创建的默认负载平衡策略VMkernel vSphere分布式交换机端口? A. Route based on orginating virtual port ID 基于orginating虚拟端口ID B. Route based on IP Hash 基于IP Hash的路线
C. Route based on source mac address 基于源mac地址的路由
D. Route based on physical NIC load 基于物理网卡负载的路线 Answer: A
Explanation:
QUESTION NO: 24
How are ports scaled on vSphere Standard Switches (vSS)? 如何在vSphere标准开关(vSS) 扩展端口
A. Ports on a vSS can be dynamically scaled up and down. 在vSS上下可以动态地扩展端口
B. Ports on a vSS can only be statically scaled up or down.
在vSS只能静态地向上或向下扩展端口
C. Ports on a vSS can only be dynamically scaled down. 动态端口vSS只能缩减。
D. Ports on a vSS can only be dynamically scaled up. 在vSS只能动态放大端口
Answer: A
Explanation:
QUESTION NO: 25
Which three connection types are available when configuring a vSwitch in the vSphere WebClient? (Choose three.)
在vSphere网页客户端配置一个vSwitch时哪三个连接器是可用的？ A. VMkernel Network Adapter VMkernel网页适配器
B. Physical Network Adapter 物理网络适配器
C. Virtual Machine Port Group for a Standard Switch 虚拟机端口组标准的开关 D. vMotion Network Adapter vMotion网络适配器
E. vSAN Network Adapter vSAN网络适配器 Answer: A,B,C
Explanation:
QUESTION NO: 26
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch?
有多少链路聚合组(滞后)可以配置在一个vSphere .x分布式开关 A. 64
B. 96
C. 128
D. 256