发布时间 : 星期日 文章avaya功能参数17页全部中文解释更新完毕开始阅读
? 一. 硬件部分介绍
1.S8720连接电缆:高可靠性或超高可靠性,硬件备份
Figure notes:
1. Eth0 — To an Ethernet switch and/or the corporate LAN for control network A (CNA) 控制网络A
2. Eth2 — Server Duplication Link 两台服务器间同步心跳
3. Eth3 — To an Ethernet switch and/or the corporate LAN for control network B (CNB) 控制网络B
4. Eth4 — To the customer LAN if the control networks are dedicated 连接到用户网络
5. Fiber duplication cable 两台服务器间光纤备份
? 二.CM4.0软件安装
2.1 准备一张AVAYA CM4.0安装光盘 2.2 笔记本电脑或台式机 2.3 网线
2.4 S8720 服务器加电,将CM4.0光盘放入光驱
2.5 笔记本连接到S8720 服务器后面的网口2(该网口是AVAYA 固化的service口,
有固定IP地址192.11.13.6),指定网卡IP地址为192.11.13.5 子网掩码255.255.255.252
2.6 Windows界面点击开始菜单---运行---cmd进入dos 2.7 Ping 192.11.13.6可以Ping通 2.8 telnet 192.11.13.6 回车 2.9 弹出安装对话框如下图
选择install(默认) Press Enter 选择Release Version版本 Press Enter
2.10 系统开始安装,注意:不要关闭次对话框 2.11 系统安装大概15-20分钟
2.12 安装完毕后系统重启,光驱弹开拿走光盘 2.13 Ping 192.11.13.6 ping通后
2.14 打开IE浏览器 输入http//:192.11.13.6 点击Continue
提示选择数字证书,确定
2.15.第一次安装系统的初始登录名:craft密码:craft01
2.16.选择Maintenance Launch Maintenance Web Interface