发布时间 : 星期三 文章Allegro教程-17个步骤更新完毕开始阅读
ALLEGRO镜
图纸标注象(boardname: ) artwork bottom 元件面光绘art 1.\) artwork top 焊接面光绘 art(n).art 内层布线光绘 art(m).art 地层光绘 ground(m).art 电源层光绘 power(m).artyes (boardname: ) artwork no layer(m) (boardname: ) ground
13 / 19
no plane(m) (boardname: ) power no plane(m) (boardname: ) silkscreen
元件面丝印silkt.artno top
焊接面丝印silkb.artyes(boardname: ) silkscreen bottom
元件面阻焊soldt.artno(boardname: )soldmasktop
焊接面阻焊soldb.artyes(boardname: ) soldmask bottom (boardname: ) pastemask
元件面钢网pastt.artno
14 / 19
top
焊接面钢网pastb.artyes(boardname: ) pastemask bottom (boardname: ) silkscreen
元件面装配adt.artno top
焊接面装配adb.artyes(boardname: ) silkscreen bottom
钻孔图光绘drill.artno(boardname: ) drill chart 数控钻孔文件 ncdrill.tap 注：
以上文件名中(n)表示板的总层数，(m)表示内部某层，如6层板的第二层为layer2,而不是Layer1,(n)和(m)均为两位数.(boardname:
)用实际板名替换
2.可以用File→Import→Sub Drawing...调用以前设计中的标注来进行修改,后缀是clp.
3.光绘文件生成步骤:
15 / 19
Manufacture→NC→Drill Paremeters...→只有Reapeat codes要选中.Manufacture→NC→Drill Legend
Manufacture→NC→Drill Tape...
Manufacture→Artwork→Parameter→ Suppress项中Leading Zeroes,EqualCoordinates要选中.
Manufacture→Artwork→Film... film中应包括的内容: Art(m).art VIA CLASS Art(n) PIN Art(n)
ETCH Art(n) BOARD GEOMETRY OUTLINE Ground or power(m).art ANTIETCH Pgp(m) VIA CLASS Pgp(m) PIN Pgp(m) ETCH Pgp(m)
BOARD GEOMETRY OUTLINE SILKT REF DES SILKSCREEN_TOP PACKAGE GEOMETRYSILKSCREEN_TOP BOARD GEOMETRY OUTLINE BOARD GEOMETRY SILKSCREEN_TOP SILKB REF DES SILKSCREEN_BOTTOM PACKAGE GEOMETRYSILKSCREEN_BOTTOM BOARD GEOMETRY OUTLINE
16 / 19