QC验货指南 联系客服

发布时间 : 星期日 文章QC验货指南更新完毕开始阅读

Dear All

Please be informed

the inflation function of each sample must be checked during inspection,

attched please see an example ,the photo of 569087,Airblow santa, Client has to stop selling the product , the reason is

the product can not be inflated as the seams broken along the stitch line.

So, when inspect airblown/inflated product, please make sure each product is checked, if the product is too big , please contact SZ office to make decision.

Thanks

Eric.Wu Oct 30,2006

Product Product

59)

Dear All

Please add Range number in home base report from Dec 29,2006.

Attached you can find an example report and

relevant Homebase shipment list to find the range number for each PO .

Also I will let you know the range number before each HB inspection.

Revised Homebase blank reports with Range number line will be attached in another emial.

Page 33 of 40

Thanks!

Eric.Wu Dec 21,2006

60) Dear All,

For all Homebase inspections, pls kindly inform all the inspectors to report to STRSZ/STRSH first before issuing an abortive report and left the factory.

Then STRSZ/STRSH should notice me immediately to confirm if there is any special arrangement/issue.

Pls kindly implement the above with immediate effect, thanks.

Thanks & Best Regards

Bee Wong

Tel: 852 29434681

Fax: 852 24805700 Jan 12,2007

61)

Dear All

During Homebase inspection,

Please conduct the drop test according to HB guideline,

1)and please be noted there are some differences between HB and other

clients on the Height/Sequence of the test:

HB Height: Weight(重量) 0 to 10Kg 10 to18kg 18 to 25Kg 25kg and above Dropping Height(跌落高度) 1.0m 0.75m 0.50m Stand package upright and push over once(垂直放置,并推倒一次) HB Sequence:1 point/shortest edge/next longest edge.

Page 34 of 40

2)No drop test for fragile product like glass or ceramic product

No drop test for transformer, Ironing boards, Bathroom cabinets, BBQ,large item of furnituer,and valuable or delicate items

3) If drop test failed,

failure to meet the requirements of the drop test would not necessarily constitute a rejection of the shipment. (对大多数产品而言,落地测试FAIL不必使出货REJECT 或ON HOLD)

It will however provide Homebase with an indication of the levels of stock loss likely to be experienced during handling and transit.( 但可以让Homebase了解产品在搬运过程中可能遭受的损失)

If a live part is exposed on electrical items (mains provided with a plug) after the drop test, this will be considered as a critical failure. (但对于电器产品(带插头的电源),如果落地测试后带电部件裸露在外,判为CRITICAL,结果REJECTED)

Thanks for your attention!

Eric.Wu Mar 06,2007

Page 35 of 40

APPENDIX ONE: Content of a Homebase Ltd Product Specification

Introduction

Comprehensive specifications are required for:

? Homebase Own Brand products, including horticulture

? Products directly imported by Homebase (Homebase branded OR with a vendor mark) ? ?Unbranded‘ products which have no mark to show the producer‘s identity.

Live horticultural lines should be specified using the Homebase Ltd Horticultural Specification. (See Appendix D)

N.B. ?Vendor‘ is the company or agency with financial responsibility for trading with Homebase Ltd.

?Manufacturer‘ is the company that produces goods for the vendor. (Vendor and manufacturer may be the same company.)

Information about the vendor and manufacturer is required for every specification.

An illustration of the finished product must be given: an electronically produced image may be inserted in Page 1. Further illustrations may be used to show method of construction, for example, an exploded view with names of parts.

Information about design, materials and manufacture, etc is to be provided by appending relevant documents. These may be prepared especially for the specification, or they may be from the vendor‘s existing in-house manuals, instructions, drawings, records, tabulations, etc, or they can be documents from external sources, for example, certificates from independent test houses. An index of these appendices must be included. Include all important dimensions, with their tolerances.

All information must be in English.

The vendor must take responsibility for the accuracy of the information by signing the specification (Page 2). The commercial and technical managers of the vendor should sign the specification. Later, when the product has been approved and accepted by Homebase, trading and product managers in Homebase will add their signatures.

Completed specifications should be sent to the product manager at Homebase Ltd. If the vendor‘s facilities allow, the specification may be sent by e-mail. Alternatively send by facsimile or mail. (Mailing may be more convenient if the documents contain colour graphics, charts and certificates).

If in doubt, contact the Product Manager at Homebase.

PAGE 1.

Please complete this page by giving vendor and manufacturer information, and an illustration of the product. Usually there will be only one product described in a specification. A range of similar products may also be described in one specification, providing that there are no significant differences in the materials, processes and controls, and all products are made in the same factory. 1 Product Title

The product name that will be used on the packaging (or a name that identifies the range). 2 Article Number, Barcode

Article number and barcode will given by the Homebase Buyer.

If the specification is for a range of products, append a list of article numbers and barcodes and the titles and descriptions of the products. 3 Vendor & Vendor Code

Enter name and address of the vendor, and the alphanumeric code, which identifies the vendor, e.g. A1234.

Page 36 of 40